SkyRC B6AC Neo Charger (AC 60W/DC 200W)

Powerful charge in a pocket-sized format - SkyRC B6AC Neo charger

The SkyRC B6AC Neo charger is a combination of compactness, power and modern technologies that take battery charging to a new level. This device retains the functionality of its predecessor, the B6 Neo, but has received significant updates that make it even more convenient, efficient and versatile.

Maximum power in a minimal package

The SkyRC B6AC Neo is capable of operating on both DC and AC power. When powered by a DC source, you get up to 200 W of power , and when connected to a regular electrical network (AC) - up to 60 W. This allows you to quickly charge batteries even in the field.

The compact size (only 70.6 × 50.6 × 46 mm) and light weight (150 g) allow you to carry the device with you without any problems. Thanks to the XT60 port and USB Type-C connector, the charger is compatible with a wide range of batteries and devices.

Modern display and intuitive control

The device is equipped with a bright TN-type color display with a diagonal of 1.77 inches with a resolution of 128×160 pixels and a display of 262 thousand colors. Thanks to the user-friendly interface and updated software from the Neo line, you can easily choose the desired charging mode or check the battery.

Energy efficiency thanks to GaN technology

The device is based on a highly efficient gallium nitride (GaN) circuit , which provides better heat dissipation and less energy loss compared to traditional silicon solutions. An integrated microcontroller (MCU) precisely regulates each charging phase, reducing the risk of overheating, overcharging or battery damage.

Multifunctionality and support for the latest technologies

SkyRC B6AC Neo supports PD and QC 3.0 fast charging protocols , allowing you to charge modern smartphones, tablets and other devices without the need for additional adapters. There is also full support for Charger Master software, which allows you to monitor the charging process from a PC or smartphone.

Built-in battery testing modes help assess the condition of batteries, check their capacity, cycles, and behavior under load.

Full compatibility with various battery types

SkyRC B6AC Neo supports many types of batteries:
 

• LiPo, LiFe, LiIon, LiHV: 1–6 cells

• NiMH, NiCd: 1–15 cells

• Pb (lead-acid): 3S/6S

Possible modes: balancing, standard charging, discharging, storage, charge/discharge cycles, recovery, AGM modes.

Flexible parameter adjustment

• Charging current: from 0.2 to 10.0 A

• Discharge current: 0.1 to 2.0 A

• Balancing current: up to 500 mA

• Max. discharge power: up to 19 W (at 6S, 4.2 V/cell)

Thanks to a wide range of settings, the device can be adapted to any scenario, from drones to RC models and even solar systems.

Technical specifications

Display type: TN

Display size: 1.77 inches

Active panel area: 28.03×35.04 mm

Resolution: 128×160 pixels

Number of colors: 262 thousand colors

Input voltage (DC): 10–30 V

Input voltage (AC): 100-240V, 50/60Hz

Charging power (DC): up to 200 W

Charging power (AC): up to 60 W

QC3.0 / PD USB-C: up to 65 W (20V ⎓ 3.25A)

Discharge power: up to 19W (at 6S)

Battery/cell types: LiPo/LiFe/LiIon/LiHV: 1–6S; NiMH/NiCd: 1–15S; Pb: 3S/6S

Charging current: 0.2-10.0 A

Discharge current: 0.1–2.0 A

Balance current: up to 500 mA (for lithium batteries)

Body material: Polycarbonate + ABS plastic

Dimensions: 70.6×50.6×46 mm

Weight: 150 g

Equipment

• SkyRC B6AC Neo Charger

• Power cable with EU plug

Result

SkyRC B6AC Neo is a universal solution for charging batteries of any type. It combines high performance, advanced functionality, compact size and support for the latest technologies. It is ideal for both experienced users and beginners in the field of RC modeling, FPV drones and other electronic projects. If you are looking for a powerful charger with support for modern standards, this is your choice.