Robot vacuum cleaner HOBOT Legee 688

The HOBOT Legee 688 washing robot vacuum cleaner with laser sensors and an electronic compass will clean your room efficiently. Thanks to its “D-shaped” shape, the robot thoroughly cleans dirt in hard-to-reach places, and built-in laser sensors and indicators help adjust the robot’s trajectory.

The main mode of operation first removes small debris, and then sprays water and carries out wet cleaning. The robot also works in 7 modes, which you will find through the HOBOT Legee application, which is compatible with the iOS and Android operating systems.

The automatic mode (standard) cleans the area, dividing it into sections measuring 4.4 x 4.4 m. The vacuum cleaner goes around each section in a “snake” pattern, then along the perimeter of its border and returns to the charging station. When controlling the remote control, you can select one mode, and from the mobile application - along the perimeter or snake.

In Kitchen cleaning mode, the HOBOT Legee 688 robot divides an area measuring 1.5 x 1.5 m.

The first cleaning step is to spray water to dissolve stubborn dirt.

In the second stage, the robot vacuum cleaner re-cleans the area, removing soluble dirt and collecting remaining water.

This mode is activated via the application or remote control.

Using the HOBOT Legee app in the Kitchen or Standard modes, you can activate an additional mode of your choice, which will increase cleaning efficiency.

Regardless of the selected mode, you can change the suction power, turn the water spray on or off, stop cleaning or return the job to the charging station.

* iOS users can control via Siri.

HOBOT Legee 688 is powered by a 2750 mAh Li-Ion battery. It takes 3.30 hours to fully charge. The robot's battery life is up to 90 minutes on an area of 130-150 m².

Advantages of HOBOT Legee 688:

• wet and dry cleaning;
• 7 modes;
• power setting;
• volumetric equipment of the vacuum cleaner;
• scheduled cleaning;
• control via remote control or app.

HOBOT Legee 688 equipment:

• vacuum cleaner;
• charging station;
• power adapter (100-240 V, 50-60 Hz at 19 V, 1.05 A);
• control panel and AAA batteries;
• water container;
• side brushes 3 pcs;
• folded dust collector filter 3 pcs;
• microfiber wipes 2 pcs;
• spare nozzles for spraying 4 pcs;
• spare mounting screws 2 pcs;
• instructions.