Window cleaning robot Hobot 388

Washing windows has always been an energy-consuming activity, after which it felt like after going to the gym. Manufacturers have designed the Hobot 388 to make your life easier or even save it, especially for those living on high floors.
 
Manufacturers have equipped the new model with an ultrasonic nozzle with a water spray in the form of small drops up to 15 microns in size, which will increase the quality of window cleaning and as a result you will get clean windows.

Hobot 388 work

The Hobot 388 model works in automatic mode and through an application compatible with iOS and Android. Before starting use, it is necessary to charge the additional power battery, which, in the event of a power failure, will hold the work on the surface with strong vacuum suction cups and complete the work until the end.

Exploitation:

1. Attach the safety cord to the robot and to a heavy object indoors.
2. Place the wipes over the attachments and ensure that the attachments are firmly seated to create a powerful vacuum.
3. Make sure the robot is securely attached to the surface.
4. Turn on the “auto” mode - up arrow, after which the robot will rise to the upper frame of the window and begin washing, clean the window with a zigzag movement and notify with a sound signal that the washing is complete.

Operating modes of Hobot 388

The robot operates in three automatic modes, where the direction of movement is determined automatically and indicated by arrows;
The “2X” key starts double mode;
Joystick with 4 arrows allows you to manually control the device;
Using a smartphone, through the Hobot 198 application, which has similar modes, and a control panel.

Window cleaning steps:

Dry cleaning is used to clean windows from the outside or when they are too dirty. This stage takes place without the use of detergents.
Basic cleaning includes the use of detergents. Spray the product along the edge of a dry cloth onto both discs. The center of the napkin should remain dry. If there is excess dirt on the glass, dampen it with glass cleaner and wait a few minutes. Then start working.
Removing streaks. For this step, you need to moisten the upper disk with detergent in the center, and the lower disk along the outer edge, leaving the center dry.

Specifications:

• initial voltage 24 V / 3.75 A;
• dimensions 295x148x95;
• weight 0.915;
• Li-Po battery, 14.8 V;
• emergency operation up to 25 minutes;
• cleaning speed 4 min/m2;
• maximum size of one glass: height 6 m, width 5 m;
• minimum dimensions 35x35 cm;
• connects to a network with a voltage of 100-240 V and a frequency of 50/60 Hz.

Equipment:

• Safety cord (attached to the robot) 1 pc:
• Remote control 1 piece
• Power adapter (100 ~ 240 V, 50 ~ 60 Hz) 1 pc
• AC power cable 1 piece
• DC extension cord (4 meters) 1 pc.
• Microfiber brushes 14 pcs;
• Fastening ring for brushes 4 pcs;
• Instructions 1 pc.

The washing robot cleans not only windows, but also tiles, walls, floors and other surfaces. Just turn on HOBOT, apply it to the desired surface and as a result you will get a streak-free clean.