Radio system Synco WAir-G1-A2

Radio system Synco WAir-G1-A2 (Wair-G1 A2) for 2 speakers

The Synco WAir-G1-A2 radio system is a 2.4 GHz wireless stereo microphone that uses the SyncoderTM algorithm for secure and stable audio transmission. It has two transmitters and a receiver, small size and excellent performance. It can operate at a distance of up to 50 meters, supports two output modes (mono or stereo), has an optional low-pass filter and signal gain control. It also features a built-in lithium-ion battery that provides up to 5 hours of use.

Capabilities and technologies of the Synco WAir-G1-A2 radio system

SyncoderTM encryption algorithm

The Syncoder TM encrypted transmission algorithm used in the Synco WAir-G1-A2 radio system provides a high level of security and protection of audio data during transmission. It ensures that the transmitted information remains confidential and inaccessible to unauthorized persons.

Syncoder TM is a special encryption algorithm developed by Synco that is used to encode the audio signal during transmission between the transmitter and receiver of the Synco WAir-G1-A2 radio system. It provides digital protection of transmitted data, which eliminates the possibility of unauthorized access and eavesdropping.

Maximum mobility

The Synco WAir-G1-A2 radio system has an impressive signal transmission range of up to 50 meters. This means that you can freely move a considerable distance from the receiver without losing sound quality.

With such a long transmission range, the Synco WAir-G1-A2 radio system is ideal for a variety of shooting scenarios where mobility and flexibility are required. It allows camera operators and recording technicians to move freely around the location without being restricted by wires or cables, while ensuring reliable transmission of high-quality audio signals.

Real-time audio optimization

The DSP (Digital Signal Processing) technology in the Synco WAir-G1-A2 radio system plays a key role in delivering high-quality audio reproduction. DSP is the process of digitally processing audio signals to enhance and optimize the audio characteristics of a signal.

The digital signal synthesizer in the Synco WAir-G1-A2 radio system uses DSP technology to provide clear and accurate conversion of analog audio into digital format and its subsequent processing. This allows you to achieve a high degree of accuracy and maintain the original sound quality.

One of the main functions of the DSP technology in the Synco WAir-G1-A2 radio system is noise suppression. The DSP can analyze and filter out unwanted noise and interference that may occur during audio transmission. This significantly improves sound quality by eliminating unwanted audio distortion and delivering a clear, crisp audio signal.

Superior sound quality with Synco WAir-G1-A2 radio system

The Synco WAir-G1-A2 radio system is equipped with two operating modes: mono and stereo. These modes allow you to effectively restore the direction and distribution of sound to achieve the best quality audio recording.

In mono mode, the Synco WAir-G1-A2 stereo microphone combines two recording channels into one, creating the so-called “central” sound. This allows you to record and transmit audio in mono format, where all audio sources will be reproduced equally in both channels. The mono mode is especially useful in cases where precise reconstruction of the spatial audio image is not required, for example, during interviews or reportages.

In stereo mode, the Synco WAir-G1-A2 radio system provides restoration of spatial information and more realistic sound reproduction. The audio signal from the transmitter is transmitted to the receiver in two separate channels (left and right), maintaining the direction and distribution of the sound. This allows you to record and transmit immersive audio and create deeper, more spacious sound.

Eliminate noise and fine-tune

Synco WAir-G1-A2, one of the excellent wireless stereo microphones from SYNCO, includes a unique low-frequency filter up to 180Hz, which effectively eliminates noise caused by wind, air conditioners and traffic. On the receiving side there is a volume control with a range from 0 to 4 and a gain level of up to 8 dB, providing simple and effective signal optimization. The 3.5mm TRS headphone jack allows you to monitor audio in real time, allowing you to quickly make adjustments. The result is clear and unrivaled sound output.

Long recording time up to 8 hours

The Synco WAir-G1-A2 radio system is equipped with a built-in 400 mAh lithium-ion battery, which ensures long operating time and ease of use. Thanks to this battery, the radio system is capable of recording audio for 8 hours continuously.

A particularly convenient feature is the ability to charge the battery while recording. This means that even if you start to run out of battery power while working, you can connect the radio to a power source and continue recording without interruption. This is especially useful for long shoots or when you can't afford to simply interrupt the recording process.

Moreover, it is important to note that the Synco WAir-G1-A2 battery has fast charging. In just 40 minutes the battery can be charged to 50% of its full capacity. This allows you to minimize downtime and get back to work quickly.

The Synco WAir-G1-A2 radio system is a professional tool for transmitting audio signals over long distances, which provides high sound quality and versatility in use. This radio system is equipped with many features that make it convenient and easy to use. If you are looking for a reliable and professional tool for transmitting audio signals over long distances, then you can buy the Synco WAir-G1-A2 omnidirectional microphone radio system in Odessa.

Equipment:

• Receiver x1
• Transmitter x2
• Wind protection
• Charging cable
• External microphone with wind protection
• TRS 3.5 mm camera connection cable
• Cable for connecting a smartphone TRRS 3.5 mm
• User guide
• Case for storage and transportation

Specifications:

Transmitter:

• Wireless digital transmission: 2.4 GHz
• Frequency range: 2400-2483.5 MHz
• Working distance: 50m
• Latency: 12.5ms
• Audio input: 3.5mm TRS microphone input
• Audio input level: 0 dBV
• RF output power: up to 10 mW
• Battery charging time: 1.5 hours
• Working time: 8 hours
• Dimensions: 52 x 42 x 16 mm
• Weight: 35 g
  

Receiver:

• Wireless digital transmission: 2.4 GHz
• Frequency range: 2400-2483.5 MHz
• RF sensitivity: -81 dBm
• Working distance: 50m
• Latency: 12.5ms
• Number of audio channels: 2

• Audio output:
  3.5mm TRS microphone output
  TRS 3.5 mm headphone output

• Gain Range: 0 to 8 dB
• Battery capacity: 400 mAh
• Charging time: 1.5 hours
• Working time: 8 hours
• Dimensions: 52 x 42 x 16 mm
• Weight: 35 g
  

Microphone:

• Form factor: built-in/external microphone
• Polar radiation pattern: omnidirectional
• Frequency: 50Hz-20KHz
• Sensitivity: -40 dB (±3 dB)
• Max. Input SPL: 135 dB SPL
• Connector: USB Type-C