USB 3.1 Type C Vertical Patch Board 16pin 4 Welding Wire Data Band PCB Adapter Board

USB 3.1 Type C Vertical Patch Board 16pin Adapter Board

 

This miniature breakout board is a ready-made solution for integrating the modern USB Type-C interface into your electronic projects. The module is equipped with a 16-pin USB 3.1 Type-C connector, soldered on a vertical board with convenient pads for soldering wires. It is an ideal component for repairing gadgets, creating custom cables or upgrading devices with outdated connectors (e.g. microUSB).

The board acts as an adapter from a complex 16-pin Type-C connector to terminals convenient for hand soldering. The "Vertical Patch Board" design implies a vertical arrangement or a convenient form factor for embedding in cases where rigid port fixation is required. The module supports both power transmission and data exchange.
 

Advantages

1. Ready to Weld

The main difficulty in working with Type-C connectors is the microscopic pitch of the contacts, which is difficult to solder by hand. This board solves this problem: all the necessary contacts are already brought out on the printed circuit board to large, tinned pads, to which it is easy to solder wires even with a regular soldering iron.

 

2. Support data transmission and power supply

Unlike the cheaper 2-pin versions (for charging only), this 16-pin version has a Data Band. This allows the module to be used not only for charging devices, but also for synchronization and data transfer using the USB 2.0 protocol.

 

3. Reliable construction

The Type-C connector is securely mounted on a printed circuit board (PCB), which provides mechanical strength. When connecting and disconnecting the cable, the load falls on the board and the device body, and not on the fragile solder joints of the connector contacts themselves.
 

Technical specifications

• Connector type: USB 3.1 Type-C (Female)
• Number of connector pins: 16 pin
• Installation type: Soldering Wire (Welding Wire)
• Board material: FR-4 fiberglass
• Main pins: VBUS (power), GND (ground), D+ (data), D- (data), CC1/CC2 (channel configuration)
• Bandwidth: Supports charging and data transfer standards (within the specification of the controller used)

 

What is included in the kit?

• USB 3.1 Type-C adapter card (with connector installed)
   

Scope of application

• Electronics Repair: Replacing Broken Charging Connectors in Phones, Tablets, Bluetooth Speakers, and Headphones
• Retrofit (DIY): Converting devices from micro-USB or mini-USB connectors to modern Type-C
• Prototyping: Use in DIY power supplies, chargers, and Arduino projects
• Testing: Creating test benches to test cables and chargers

Why should you buy the USB 3.1 Type C 16pin 4 Vertical Patch Panel?

The USB 3.1 Type C 16pin adapter board saves you time and nerves. Instead of trying to solder wires to the connector pins under a microscope, you get a ready-made industrial-quality module. This is a reliable, inexpensive and versatile solution that should be in the arsenal of every electronics repairman and radio amateur.