Motorcycle headset FreedConn T-COM-VB with FM radio Dual Pack

Motorcycle headset FreedConn T-COM-VB with FM radio Dual Pack

Such a thing is necessary for everyone who drives a vehicle - a motorcycle, scooter, bicycle. A good option for snowboarders and skiers. The device allows you to always stay in touch, listen to your favorite tracks, radio or chat with friends via Intercom.


A motorcycle headset with Bluetooth connection for up to 3 interlocutors will make it possible to maintain contact with a passenger or another motorcyclist. In intercom mode, two-way communication between headsets is supported; it is also possible to connect the headset to a smartphone to listen to voice prompts from the navigator, as well as listen to the radio.

In the updated version 2021, the port for headphones and microphone has been changed to Micro USB. The set of microphones has been updated: now the set includes 2 microphones - one of the “integral” type for installation on a helmet, and a microphone on a boom. Using the proprietary connector, you can connect any microphone to the headphones.

Features of the FreedConn T-COM-VB motorcycle headset with FM radio Dual Pack:

• connection via Bluetooth with similar devices, smartphone, navigator, etc.;
• two-way communication between users, connection to up to 3 headsets;
• answering machine for incoming calls in 8 seconds
• listening to stereo music;
• IP54 protection, outlets, moisture, dust and sun;
• calling the last one in the incoming call log;
• communication via Bluetooth with GPS navigator;
• 7 hours of operation in Intercom mode;
• 10 hours of operation via Bluetooth connection and GPS mode;
• 30 hours standby time;
• DSP, wind and noise reduction system;
• excellent sound even at high speeds up to 120 km;
• FM radio.

The functionality of the FreedConn T-COM-VB motorcycle headset with FM radio is simple. On the body there is an ON / OFF button, a wheel for adjusting the volume, a multifunction key for accepting a call, which serves as a button for activating the radio and controlling music.

Motorcycle headset control:

1. Connection with phone
- hold the power button for 8-10 seconds until the indicator starts flashing red and blue
- turn on bluetooth on your smartphone;
- connect with T-COMVB;
- 2 beeps after connection means successful connection.

2. Call management.
- short press - accept call;
- to reject a call, press the button for 2 seconds
- end the call - short press;
- automatic call acceptance, 8-16 seconds
- call the last dialed number by pressing a key for 2 seconds.

3. Connecting 2 headsets from Intercom
- hold the power button for 8-10 seconds until the indicator starts flashing red and blue
- on one of the headsets, briefly press the power key, after which the headset will automatically begin searching and automatically connect to the other headset.

4. Connecting 3 headsets from Intercom
- connect two headsets in series - 1-2, 2-3, 1-3. (When connecting any pair, disconnect the third headset.)
When connecting headsets 1 and 2, turn off headset 3;
- connect headsets 2 and 3, turn off headset 1;
- connect headsets 1 and 3, turn off headset 2.

To communicate in intercom mode, you must consistently
press the power key once or twice depending on
connection sequences.

For example, on headset 1, press the power key once to connect to headset 2 and twice to connect to headset 3.

To override Intercom mode, press the button for 3-5 seconds until you hear a double beep.

FreedConn T-COM-VB with FM Radio Dual Pack Specifications:

• Range: up to 800 m;
• Bluetooth: 3.0;
• Profiles and codecs:

- A2DP (stereo transmission)
- AVRCP (play/pause)
- HFP (Hands-Free).

• Radio frequencies: 64-108 MHz;
• Charging time: 3 hours;
• Bluetooth operating time: 10 hours;
• Intercom operating time: 7 hours.

FreedConn T-COM-VB with FM radio Dual Pack:

• Motorcycle headset - 2 pcs;
• Headphones - 2 pcs;
• Wired microphone - 2 pcs;
• Microphone on the boom - 2 pcs;
• Helmet clip - 2 pcs;
• Velcro clip for helmet - 2 pcs;
• Regular helmet clip - 2 pcs;
• MicroUSB cable - 2 pcs;
• Velcro for headphones - 8 pcs;
• Velcro for microphones - 4 pcs;
• Hexagon - 2 pcs;
• Instructions.