Quadcopter FPV Custom1 7 inches (ERLS)

Quadcopter FPV Custom1 7 inches (ERLS)

A super efficient 7 inch long range FPV quadcopter that can carry a large battery on board for long and long distance flights. An ultra-rigid frame for minimal resonance and powerful motors ensure maximum control performance with 7.5-inch diameter propellers.

Characteristics:

Frame size along motor axes 7': 295 mm

• Form factor: DC (DeadCat)
• Beam thickness: 5 mm
• Bottom plate thickness: 2.5mm
• Camera plate thickness: 2.5 mm.
• Top plate thickness: 2.5mm
• Turret Mount Size: 19.3mm
• Motors: brushless 1300 KV
• Receiver: ELRS 915MHz
• Recommended propellers: 7x3.5x3
• Recommended FPV camera: micro 19 x 19mm

Flight controller and speed controller

• MCU: STM32F405
• IMU(Gyro): BMI270
• USB Port: Type-C
• Barometer: built-in
• OSD Chip: AT7456E chip
• BLE Bluetooth: Supported. Used to configure the flight controller
• Connection method for DJI Air Unit: using a 6-pin connector or soldering
• Support for Blackbox MicroSD memory cards: yes
• BetaFlight camera control panel: yes
• Input current sensor:
• Input Power: 3S - 6S Lipo
• ESC outputs: M1 - M4 on the bottom side and M5-M8 on the top
• UART: 6 sets(UART1, UART2, UART3, UART4(for ESC telemetry), UART6)
• ESC: Telemetry UART R5(UART5)
• I2C: supported
• Buzzer: yes
• BOOT button: yes
• RSSI input: yes
• SmartPort: yes
• Firmware support: BetaFlight(Default), EMUFlight, INAV
• Target firmware: SPEEDYBEEF405V3
• Mounting pattern: 30.5x30.5mm (hole diameter 4mm)
• Dimensions: 41.6x39.4x7.8mm
• Weight: 9.6g

Video transmitter

• Power: PIT25/400/800/1600mW
• Number of channels: 48CH
• Input voltage: 7-36V (2-8S LiPo)
• Source voltage: 5V 1A (600mA)
• Audio: support audio input
• Video format: CVBS PAL/NTSC
• Dimensions: 37 x 24 x 6.7 mm
• Weight: 11.4g

FPV camera

• Matrix: 1/1.2" CMOS
• Horizontal resolution: 1000TVL
• Lens: 2.1mm M12
• Picture format: 16:9 / 4:3 (variable)
• TV system: NTSC & PAL (changeable)
• WDR: Super WDR (HDR)
• DNR: 3-DNR
• min. lighting: 0.0001 lux Starlight
• Electronic shutter speed: yes
• Minimum Latency: 8ms
• Electric speed Shutter: PAL: 1/50~100000; NTSC: 1/60 ~ 100000
• Signal to noise ratio: > 50dB (AGC OFF)
• OSD: yes
• Day/Night Modes: Auto / Color / B&W / EXT
• WDR: Global WDR
• Power: 5-36V
• Body material: ABS
• Dimensions: 19 x 19 x 20mm
• Weight: 9 g