Camera for Autel EVO II Dual (640)

Autel EVO II Dual (640) camera for Autel EVO II drone. The model was created for photo-video recording and video patrolling in the visible and infrared spectrum.

  To do this, the manufacturer equipped the camera with 2 matrices:

• for the visible spectrum, a 48 MP ½ "Sony matrix is used with a video resolution of 8K 7680 × 4320 / photo 8000 × 6000;
• for the infrared spectrum, a FLIR BOSON LWR sensor with a resolution of 640 × 512 is used.

Features of the Autel EVO II Dual (640) Visual Camera

  48 MP camera with 1/2'' CMOS Sony IMX586 matrix and high resolution of 8000 x 6000 pixels. Zoom in the camera 1-8x without loss of quality.

  The bitrate is 120 Mbps and the color is 10 bits, which in the visible range 10-bit color encoding and HDR technology gives enhanced color reproduction with clear detail in the dark and bright areas of the image.

  The camera for Autel EVO II Dual (640) has single-frame shooting mode, continuous shooting of 3/5 frames and delayed shooting.

  Photo resolution: 5472 × 3648 (3:2) 5472 × 3076 (16:9) 3840 × 2160 (16:9)

Video Resolution: 8K: 7680×4320@25/24fps 6K: 5760×3240@30/25/24fps 4K: 3840×2160@60/50/48/30/25/24fps 2.7 K: 2720 × 1528 at 120/60/50/48/30/25/24 fps FHD: 1920 × 1080 120/60/50/48/30/25/24 fps

  Features of the Autel EVO II Dual Thermal Camera (640)

  The FLIR Boson matrix with a resolution of 640x512 has a pixel pitch of 12 microns and a wavelength of 7.5 - 13.5 microns. Viewing Angle (FOV): 32º. The lens is 14 mm and the zoom is 1-8 x.

  The camera supports MOV and MP4 video formats, PIP format (picture in picture): 1920x1080 / 1280x720.

Light sensitivity for video ISO 100 - 3200, for photo ISO 100 - 3200.

  Autel EVO II Dual (640) is mounted on a gimbal and has 3-axis stabilization.