Rent an electronic stabilizer for cameras Feiyu-Tech FY-MG 
Feiyu Tech FY-MG professional three-axis stabilizer supports cameras from Sony, Canon, Panasonic and others weighing up to 1 kg. The main advantage of this model is the rotation of all axes by 360 degrees. This solution allowed us to achieve the most smooth and trouble-free stabilization. The new brushless motors operate as efficiently as possible without making too much noise or consuming too much power.
The practical joystick on the handle can move in four directions and allows you to change the angle of inclination and rotation. Next to the joystick there is a power on/off button and also a mode change key.
The camera is mounted on the mounting platform. Before you begin, you need to balance all three axes. To do this, you will need to loosen or move one of the rings in relation to each other so that the center of gravity is distributed evenly.
Shooting modes:
- Heading Follow Mode - two axes are locked, namely forward and backward, left and right. The camera in this mode will always look in one direction. The rotary axis remains active.
- Heading & Pitch Follow Mode - the rotary axis is locked when you tilt forward and backward, the lens does not move, while turning, tilting left and right, it follows your movement.
- Heading Lock Mode - complete locking of the axes, the removal device will always face one way.
- Full inversion (inverted mode) - in this mode the camera rotates 180 degrees. It can be used for selfies and shooting from the “lowest point”
Reviews about Feiyu-Tech FY-MG Steadicam
There are no reviews for this product.
Questions and Answers (FAQ) Feiyu-Tech FY-MG Steadicam